Female part of door hinge for Liebherr KTPes 1750 (and others ?) refrigerators
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
After a decade of use, the door of this refrigerator started to sag. It turned out that the female parts of the door…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 25
- Makes
- 0
- Views
- 169
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- BSD License
After a decade of use, the door of this refrigerator started to sag. It turned out that the female parts of the door hinges werein plastic, and the top one was worn out.
This is a 3D printed replacement. On the picture, the original is the grey part on the left, the replacement the black one on the right.
Print Settings
Rafts:
Doesn't Matter
Supports:
No
Notes:
Print vertically.
Printing in grey should make a part very similar to the original.
Post-Printing
Depending on your printer, they may be a slight bulge near the top, that you may need to sand for the part to fit.
Category: Replacement Parts