Counting matching models…
I have created a simple replacement housing for the Liebherr activated charcoal filters. The original housing included a filter fleece, which I wanted to leave out of my design and placed the struts closer together. Simply print in PETG…
As the original Parts broke (see red arrow on the picture) I printed a little bit sturdier replacement parts which fit the shelf perfectly. Just reuse the Metal Beams and glass plate from the original. Fully compatible with the original…
I recommend printing in PETG for best strength. Layer height 0.12 - 0.16 mm. I recommend printing with a lot of infill, to improve the strength, infill: 50 - 70 %
LEGO Technic Weighted Counterweight – Part 80428 (Liebherr LR 13000 - #42146) The original LEGO Technic counterweight for the Liebherr Crawler Crane LR 13000 - #42146 relies on stacking identical solid elements. While visually accurate,…
Spare arm for shovel actuation, clicks in place, and there can be added a zip tie for extra hold.
Ein neuer Kühlschrank von Liebherr machte es erforderlich, dass zu dem vorhandenen Einsatz der Flaschenablage , eine weitere gebraucht wurde. Der Einsatz kostet so um die 30 Euro!? Hier eine einfach zu druckende Datei welche dem Original…
We replaced the door handles on our Liebherr refrigerator, because the old ones turned yellow over the years. The new handles came without cover caps, so I made my own. Depending on settings and filament, the bottom plate might be a bit…
Combined two of the single-hinge handles ( https://www.thingiverse.com/thing:4247988 ), to replace the broken handle at my Liebherr Comfort refrigerator. Overall length is 180mm. This model has to be scaled down to 10% (due to size of…
tower crane section LIEBHERR 550 HC
This is a reengineering wrist Liebherr door. The original part was made of metal. Currently in place and work fine. For the spring you will find them on a well known website. I will give you the coordinates by email if you wish.
Shelf separator for LIEBHERR fridge. Helps maintain vertical soft packs. Increased the length of the divider almost to the wall. So that the packages do not fall over him, as happened with the original. Print with support. I sliced in…
To determine whether the insert fits into the refrigerator, measure the underside of the basket. The length is 335mm. The width is trapezoidal. It is 220mm wide at the front and 210mm at the back. Um festzustellen, ob der Einsatz in den…
This door divider is designed for the Liebherr refridgerator model "CBNesf 3913 Comfort BioFresh NoFrost". It is intentionally slimmer than the original door divider. I recommend to print the divider using PETG.
for my LR 1800 i found that my old crane boom sections did not have a way to make the derrick boom, so i modified it to make this old booms are on my profile
Dies ist ein Remix von IMRFs smartem Kühlschrankgriff: https://www.thingiverse.com/thing:4742953 . Ich habe die Form angepasst, sodass der Griff auf einen aktuellen Liebherr-Kühlschrank passt. Die Files enthalten zwei verschiedene…
Eine Möglichkeit die defekte Haspelwelle für den Liebher-Spielzeugkran des Herstellers Bruder zu ersetzen. Das Modell ist für den Druck ohne Stützstruktur ausgelegt. Gedruckt aus PETG, 0,6 mm Düse, 0,3 mm Layer, 4 Perimeter und 40% Infill…
Schránka na puťovky a jiné dokumenty velikosti A5 uchycená přísavkami s odkládacím prostorem pro kuřácké a psací potřeby Materiál PETG; 7 perimetrů,tryska 0,4, tisk 0,10, organické podpěry na 15%
We purchased a Liebherr Monolith column set (Refrigerator and Freezer), but the cabinet doors for it wouldn't be ready for several months. I modeled these temporary handles to use until then. Warning: The gap between the handles is small,…
A custom 3D-printed extension designed to maximize the egg storage capacity of Liebherr refrigerators. The original tray holds only 10 eggs and leaves unused space in the door rack. This extension seamlessly fits into the existing tray,…
CZ: Na lednici jsou 2 Ovladače a 2 Šipky. Šipky se nalepí na Ovladače! Doporučuji otočit Ovladač směrem k číslu 0 a poté šipky nalepit. EN: There are 2 Controllers and 2 Arrows on the fridge. The arrows will stick to the Controllers! I…
Ersatzteil für Liebherr Glasplatten-Halterung. Spart euch die 20 € für das Originalteil! Dieser Clip ersetzt den Halter mit der Nummer 7428284 . Material: Nutze PETG oder ASA (lebensmittelecht & kältebeständig). PLA wird im Kühlschrank zu…
The hinge of the freezer door for a small Liebherr fridge I printed it in PETG, but PLA should work as well
This is a replacement holder for the door compartment on my fridge (Liebherr, KI 1849 Index 20 / 001). Uses the same metal bars and glass plate as the original. Instead of the original plastic part, that hooks into the doors holes, this…
The original distance blocks from Liebherr have been too short for the location of my fridge, so I designed on, which fit my need. If you need a custom lenght, just measure the distance of the beige block holder from the fridge and the…
When our new fridge asked for replacement of air filter I was baffled why fridge needed one at all. Then I saw original Liebherr prices for it and was like no thanks. Then I found this model:…
Our old Liebherr Fridge use magnets placed on bottom of doors to monitor door opening. I have to make new magnet holders to replace broken original . I designed it for neodym magnet 12 x 4 x 2 mm
A simple replacement part to hold the freezer-door in place. I had to re-drill the hole in which the door pin is held with a 9mm drill, because it's a bit too small and you just want a clean surface for the rotating pin. Printed on the…
Sur mon modèle, il faut pratiquement sacrifier un étage dans la porte si on veut mettre un espace suffisant pour des bouteille. Le problème est que, si on ne met pas de bouteille on perd pas mal de place. Mon dispositif permet de…
This is a reinforced window holder designed for excavator cabins. The part was: ✅ Tested on: Mecalac 12 ✅ Also fitted to: Liebherr 900B ⚠ May fit other machines using similar window mounting geometry The design is strengthened compared to…
Eine Möglichkeit die defekte Haspelwelle für den Liebher-Spielzeugkran des Herstellers Bruder zu ersetzen. Das Modell ist für den Druck ohne Stützstruktur ausgelegt. Gedruckt aus PETG, 0,6 mm Düse, 0,3 mm Layer, 4 Perimeter und 40% Infill…
Ersatzteil für Liebherr Glasplatten-Halterung. Spart euch die 20 € für das Originalteil! Dieser Clip ersetzt den Halter mit der Nummer 7428284 . Material: Nutze PETG oder ASA (lebensmittelecht & kältebeständig). PLA wird im Kühlschrank zu…
This overly specific adapter was made to mount a NIC “dozer blade” to a the Bruder SCANIA R-series Liebherr crane truck. Other models may work as well Layer hight: 0.2mm Infill: 15% Supports: off
This guard rail prevents small items from falling off the fridge door shelf. Just stick it on the existing rail and you're good to go.
Printsettings: ABS Layerhigh: 0.2mm print with support
When swinging the fridge door open in a rush taller bottles might loose balance and fall out - don't ask why I know. This braket prevents this. To access a bottle you swing the braket up an pull it out. The connector is a snug fit on my…
Because the original brackets for the door shelfs tend to crack really easy I designed some sturdy 3D-printable replacements. The brackets are designed to be printed without support and are aligned with the print layers to be as strong as…
This is a separator for Liebherr fridge models with narrow metal rods (ours was built around 2017). It's also longer so that the divider almost reaches the back of the shelf. Inspired by…
Handles for Liebherr fridges that attach using 1x25mm double-sided tape. Verified compatible with the following models, however other models with the same door design may also be compatible: CNSDA5723 CBNSDA572l The same model works for…
This is a functional replacement part for the original refrigerator handle that commonly cracks over time. The model was designed to match the original dimensions and mounting points of the Liebherr 35010 series refrigerator handle. For…
This model should be more an inspiration on how simple sometimes a repair can be … Actually the original glass bed mount in the left back corner broke and with the whole load now on the front mount also this one gave up. We had a similar…
This is a wall spacer. If you put your freezer too near to the wall back wall, air circulation goes down. This leads to increased energy usage and wear overall wear on its heat pump. The original spacer is really flimsy and broke quite…
Yet another design for the Liebherr fridge door shelf bracket (H7426774) replacement (There are 5+ already on printables) yet I designed one before checking. So here it is. Supportless as always.
The fancy handle of a Liebherr refrigerator broke, so I temporarily fixed it with a simple one. It's been in use for almost a year now, in much the same way as most temporary solutions tend to stay. It is not pretty, but quite strong as…
My fridge light switch broke, instead of buying a new one I modeled one ! It works perfectly. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Yes Supports: Yes Resolution: 0.10 Infill: 20 Filament: Amazon Basic PLA or PETG…
After a decade of use, the door of this refrigerator started to sag. It turned out that the female parts of the door hinges werein plastic, and the top one was worn out. This is a 3D printed replacement. On the picture, the original is…
Simple repair for broken plastic part of the refrigerator handle print with min 10 wall layers. Upd. v2 more strong.
Liebherr Fridge Door Shelf Bracket Motivation After the plastic of a door shelf holder in my fridge broke, I designed and printed a replacement. My model of fridge is Liebherr IKP 2654 Index 20 / 001. The shelf brackets may or may not fit…
Door bracket replacement for Liebherr fridge Print Settings Printer: FLSUN Q5 Rafts: No Supports: Yes Resolution: 0.2 Infill: 20% Filament: Sakata Petg White Category: Parts
This cover was made for the Liebherr fridge of my parents. I simply printed it without supports on my printer.
"Miniature" model of the Liebherr LR13000 crane. This model of the LR13000 exceeds one meter in height and is completely dynamic, replicating all the movements of the original crane. The model is designed for motorizing the lifting part…
Another simple egg holder for 8 eggs. It is 200x98 mm and two of these fit shelf in my Liebherr fridge snugly. Feel free to change the dimensions in FreeCAD model.
