Mecalac / Liebherr Excavator Window Holder – Reinforced (PETG, Steel Rod 10 mm)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Reinforced excavator window holder designed for Mecalac machines. Tested on Mecalac 12 and also fitted to Liebherr 900B.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 47
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
This is a reinforced window holder designed for excavator cabins.
The part was:
✅ Tested on: Mecalac 12
✅ Also fitted to: Liebherr 900B
⚠ May fit other machines using similar window mounting geometry
The design is strengthened compared to OEM-style plastic holders and intended for long-term use in demanding working conditions.
Key features
Reinforced body
Steel core for load transfer
Suitable for heavy cabin glass
Designed for PETG printing with 100% infill
Required hardware
⚠ Mandatory – not optional
Steel rod: Ø 10 mm
→ must be press-fitted into the printed holderThread: M8
→ internal thread required in the printed “nut” part
⚠ Do NOT use without the steel rod – the rod is a structural element.
Print settings (tested)
Material: PETG
Infill: 100%
Layer height: 0.20 mm
Perimeters/Walls: 4–5 recommended
Supports: No (depending on orientation)
Printer: FDM (tested on consumer-grade machine)
Assembly instructions
Print all parts with 100% infill.
Cut a 10 mm steel rod to the required length.
Press-fit the rod into the holder (vise or press recommended).
Thread the printed nut to M8 (tap required).
Assemble the holder on the window mechanism.
Notes
PETG is recommended for:
vibration resistance
temperature changes
outdoor / industrial environment
PLA is not recommended.
If press-fit is too tight or loose:
adjust XY compensation (±0.05–0.1 mm)
Check alignment before final installation on the machine.
Disclaimer
This is a non-OEM replacement part.
Use at your own responsibility and always verify fitment before operation.