Travel Trailer Tip Out Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Larger size tip out tray for a Travel Trailer kitchen drawer.
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 104
- Wydruki
- 2
- Wyświetlenia
- 795
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
We have a Winnebago Micro Minnie Travel Trailer and the tip out tray that came in the kitchen drawer was so shallow and small, it was next to useless. So I made one that is much larger and deeper. This is a drop-in replacement and fits right on the same screws that the original tray used. I included pictures of both so you can see the difference between the original tray and the new one I made.
I added a notch at the top so the tray doesn't interfere with the drawer handle hardware.
Print Settings
Printer: AnkerMake M5
Filament: PLA (I used Eryone Matte Gray to match the colors of my trailer)
Infill: 20%
Supports: No
Layer Height: 0.2mm
Should fit on most printer beds when turned 45 degrees.