DJI Mavic Pro Keychain (Printable With Single Extruder)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model can be printed on any printer
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 404
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a multi-color keychain i designed in Fusion 360. This can be printed (with a little patience) on any printer, no matter the size and number of extruders.
The model is split into 3 parts: (1)Black, (2)Orange and (3)White. They must be printed in this exact order for the print to succeed.
To print this model, open 3 instances of your favorite slicer software, and import the parts. From there, give the 3 models the exact same coordinates on the print bed. Slice them and save them. The 3 files should be printed consecutively, without removing the print from the bed. Make sure the first model is securely attached to the bed, otherwise there can be alignment problems later. Make sure to clean the nozzle with a brush or some tweezers. I suggest you print these models closer to the edge of your bed for easy access if the nozzle needs cleaning right before the print starts.
When the print is started, the nozzle should go near the printed part, raise to the appropriate height, then move over and start to print. Keep a close eye to your print head when starting each print, so that no collisions occur.
With a little luck and patience you should be left with an amazing multi-color print on a single extruder printer :)
I provided the STEP file if you want to make some modifications to the model. Happy printing!