Audeze Maxwell earpad spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For those with big ears, a spacer to increase the earpad depth by 10mm
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 497
- Wydruki
- 2
- Wyświetlenia
- 3962
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Public Domain
For those who want deeper earpads on their Audeze Maxwell. These spacers increase the depth of the standard earpads by 10mm.
Audeze Maxwell uses a turn and lock mechanism to fasten the earpads, so these spacers snap in place using the original geometry - no modifications required. Just print two, L and R are identical.
I printed these with petg, a 0,5mm nozzle and 0,3mm layer height. No supports are needed, except for the 4 tabs on the top. A support overhang angle of 80 degrees should work for this.
This changes the sound. With the extra 10mm the bass sounds louder to my ears, so I use the treble boost preset to compensate. (If you're a basshead, don't)
https://www.reddit.com/r/Audeze/comments/11vq0cb/audeze_maxwell_earpad_depth/