P
Printables
105mm earpad mounts for head(amame)
Design changes performed using JSCAD
Wyniki wyszukiwania: earpad
Liczymy pasujące modele…
P
Printables
Earpad Spacer for Beyerdynamic MMX150
Proven working: PLA 0,15 structural Snug supports everywhere (organics do work but are a pain to clean up) Remember to remove supports on the inside
P
Printables
Sennheiser HD 450BT Larger Earpad Adapter
One of the main complaints about the Sennheiser HD 350BT/450BT/458BT headphones are the small earpad size. Many have suggested to use larger earpads from other headphones like the ones from the WH-XB900N (as shown in images). This works…
P
Printables
Hifiman HE4xx earpad conversion kit for regular earpads (parametric model)
Simple printable adapter ring for Hifiman HE4xx (HE400se, HE400i, HE400S) that allows mounting standard round earpads (e.g. 100–110 mm aftermarket pads like Dekoni, Brainwavz, Yaxi, etc.). Replaces stock mounting system → easier pad…
P
Printables
Sivga SV021 Adapter for Beyerdynamic Earpads
Note that replacing the original earpads will significantly alter the sound of the headphones. Aftermarket bass heavy (Beyerdynamic) earpads would be preferred, but even with them the sound would be much different. I created this adapter…
P
Printables
Sennheiser Earpad Adapter Oval to GSA
I've designed an Adapter to put the new Earpads from an EPOS GSP 670 on my old and beloved Sennheiser HD 380 Pros. https://www.amazon.de/gp/product/B09FDD8XYN Its recommended to use 100% infill to not compromise on the sound to much. Its…
P
Printables
Hifiman HE560 earpad spacer
After recently purchasing a set of used Hifiman HE560 headphones, I found that after a while the inside of the drivers was pushing on the outside of my ears. A simple solution is to add a little space between the driver and pad, which is…
P
Printables
Hifiman HE400SE Bass Bosst Earpad adapter.
Based on Tiddley earpads bracket, closed the holes, this bracket is made and recommend to use with Tiddley Fazors but they are optional (use double side tape on the magnets holder not on the magnets). Boost sub bass, bass and reduce a…
P
Printables
Jabra moaural headset earpad
I have long hair which is normally tied back and regularly find when I go to remove the headset that the t-bar above the open ear gets tangled up, very annoying. I designed this to simply attach to the t-piece and it perfectly solves the…
P
Printables
ATH-M40X earpad cloth holder
Update: I made the outer ring smoother and thinner in places where it was poking out too much. I have not tried that version yet. It should be more flush inside the pad mount. My Audio Technica ATH-M40X headphones fake leather was coming…
P
Printables
HD681 Earpad quick release
I made these as a way to quickly detach the foam pads for cleaning or switching to the PU-leather ones via magnetic connection with the screws on the HD681 Evo Headphones. I used 4-5 tiny 6x1mm magnets per hole that fit the Screwholes.…
P
Printables
Monoprice Retro Earpad Spacer
Stock pads on the Monoprice retro are slim so the tips of my ear touch the driver grill. Instead of buying a $40 set of brainwaves pads with taller padding, I made this spacer in two heights. 0.375" and .45" Offset height Prited on a…
P
Printables
Audeze LCD-series (2/3/4/4z...etc) Earpad 4mm Spacer
Does what it says on the tin. A 4mm spacer for the large round Audeze headphones. Made it such that I could try out the ZMF Audeze Sub Pads on my LCD-2 fazor. Unfortunately, requires double sided tape to mount to the headphones. I'll…
P
Printables
AKG K701, K702 & others earpad rings
This is a simple recreation of the plastic rings on the bottom of the standard earpads used with the AKG 701 (and other compatible ones). It will allow you to test many 3rd party earpads (standard 100 mm ones) and see which one works best…
P
Printables
Earpad Spacer for Beyerdynamic MMX150
Proven working: PLA 0,15 structural Snug supports everywhere (organics do work but are a pain to clean up) Remember to remove supports on the inside
P
Printables
Dali IO-12 Earpad Adapter (WIP)
These are earpad adapters for the Dali IO-12. The original earpads are excellent but the adhesive degrades overtime. Unfortunately, buying OEM Dali IO-12 earpads are fairly expensive so I wanted to have an alternative. I've included a…
P
Printables
Ultrasone Earcup / Earpad Adapter
Bought some supposedly "Made for Ultrasone Pro 900" earpads from AliBaba and of course, they weren't exactly plug and play. They fit on my AKG K181DJ phones quite perfectly, but for my Ultrasones, I needed an extra part if I wanted to…
P
Printables
Sennheiser HD 450BT Larger Earpad Adapter
One of the main complaints about the Sennheiser HD 350BT/450BT/458BT headphones are the small earpad size. Many have suggested to use larger earpads from other headphones like the ones from the WH-XB900N (as shown in images). This works…
P
Printables
Hifiman HE4xx earpad conversion kit for regular earpads (parametric model)
Simple printable adapter ring for Hifiman HE4xx (HE400se, HE400i, HE400S) that allows mounting standard round earpads (e.g. 100–110 mm aftermarket pads like Dekoni, Brainwavz, Yaxi, etc.). Replaces stock mounting system → easier pad…
P
Printables
Haylou S30 (S35/S40 maybe) Aftermarket Earpad Ring Mount
My original "leather" earpads started disintegrating, so I got myself some of the custom aftermarket ones for like 6$ a set. I got the velvet ones. They are extremely comfortable, but because of the foam and stuff, the quality of the…
P
Printables
CMF Headphone Pro Earpad Adapter to Microsoft Surface 2 Earpad
Main: Ive created an adapter to adapt my current headphone's earpads to the CMF Headphones for a more comfy experience as well as better seal between my head and the headphones even while wearing glasses. Ive decided to share the model…
P
Printables
Sivga SV021 Adapter for Beyerdynamic Earpads
Note that replacing the original earpads will significantly alter the sound of the headphones. Aftermarket bass heavy (Beyerdynamic) earpads would be preferred, but even with them the sound would be much different. I created this adapter…
P
Printables
Replacement earpads for headset
4.8mm ID with 6mm step so that these slide onto my Sony mini-headset. This should be fairly standard for the horseshoe headsets with the wired earbuds. I glazed them with a heat gun, then when a little soft I inserted them onto the…
P
Printables
Razer Blackshark V3 X Hyperspeed earpad spacer
Please read this first! No Pictures for now, I'll add them when I have the time. Do this at your own risk. The spacer is split into 3 pats, which are hold together by friction. You need to remove the earpad and unscrew the speaker from…
P
Printables
FiiO Earpad adapter for JT3
I bought some nicer earpads but didn't check if they would fit. The adapter is made specifically to fit Brainwavz Velour Oval Replacement Earpads but should work with any 90mm x 110mm oval earpads. You will need 2x of each part for both…
P
Printables
Plantronics C3220 Earpad adapter
As mentioned in the original model, this design is meant for these earpads. Print with the earpad side facing down and use supports for overhangs. This allows for a flat gluing surface.
P
Printables
Beyerdynamic Custom Street Earpad Interface Ring
I bought these puffy sheep-leather earpads to upcycle my old custom street headphones, but when i went to change the earpads i noticed that the stock ones were glued to the interface rings, and ontop of that the rings had been shattered…
P
Printables
Corsair Virtuoso Earpad Plate
I had an issue with my headset where 2 out of the 3 tabs on one of my earpads broke clean off. This is a remix from kir13y's adapters that he made to fit aftermarket earpads but the tabs fit perfectly in the base. I don't have any issues…
P
Printables
Grado Earpad Holder
needed something to hold my spare earpads when I was wearing other ones.
P
Printables
Koss Pro4S Earpad Adapters
Four adapters that allow you to use regular round earpads with Koss Pro4S. 100mm, 105mm, 110mm, and 105x90mm ergonomic (follows the shape of the case with 16mm offset) I personally use 100mm with aftermarket DT770/990 leather earpads. All…
P
Printables
Audeze Maxwell earpad spacer
For those who want deeper earpads on their Audeze Maxwell. These spacers increase the depth of the standard earpads by 10mm. Audeze Maxwell uses a turn and lock mechanism to fasten the earpads, so these spacers snap in place using the…
P
Printables
Sennheiser Momentum 4 Headphones Earpad Clip Ring
Replacement for the original to use with ATH-M50X earpads. Cut small holes on the earpad lip corresponding to the holes on ring. Can be a little fiddly to get the cut lip holes to align with the holes on the ring to install but once done…
P
Printables
Audio-Technica ATH-A700 Earpad Holder
After more than 13 years of near daily use, the old plastic that holds has started to show it's age and cracked, the audio is still good and I love these headphones, so I model this up rather than designating this to the trashbin. This…
P
Printables
Corsair Vengeance 2100 Earpad Adapter
This is a adapter you can put on your old headset to mount some new earpads, since those who came on those headsets originally are falling apart by now. To install this adapter you first have to carefully pull off the old earpad along…
P
Printables
Plantronics W700 Replacement Earpad Ring / Frame
Lost an earpad... Replacement cushions are common and $5 a pair, but the plastic frames they go on have proven a challenge to find. Definitely fits Plantronics W710 and W720, might fit others. Category: Audio
P
Printables
Earpads E-bike helmet (Lazer urbanize)
Grid structure designed to create a rigid and slightly flexible support for earpads. It needs a piece of fabric stitched around to make it windproof, I also put a piece of cushion fabric in between to make it more comfortable. Put the…
P
Printables
Sennheiser HD600 series earpad adapter ring
Should work with HD6xx, HD650, HD600, HD58x, HD580, HD660S, HD565, HD545 Depicted in the photo is an HD58x with Shure SRH1540 Alcantara Ear Pads. If you remove the stock foam and use the included foam on the Shure ear pads you get a very…
P
Printables
Arctis 3 5 7 earpad extender
How to use this print: Print each part once, glue them together. Make sure they fit on your Arctis headphones (they might need a little help). If everything seems ok, you can print the second pair for the other ear. Glue the parts on the…
P
Printables
Philips SHP9600 Earpads mount
I have designed this earpad mount so it's possible to make modified versions of the earpads. It's a tight fit, I have printed in PLA with 100% infill. No supports needed.
P
Printables
Razer Blackshark v2 earpad frame replacement
!!! THIS WAS DESIGNED FOR RAZER BLACKSHARK V2 ONLY (almost) !!! Based on what I found online the V2 PRO (old model before 2023) should have the same earpad frame as the normal V2, while the V2 X and V2 PRO 2023 edition have another kind…
P
Printables
Jabra Evolve2 65 - Replacement Cushion - Earpads
I've had the Jabra Evolve2 65 Headset for over 3 years now. Because of daily use the earpads began to desintegrate to the point i had black pieces of the fake leathery fabric sticking to my face on a regular basis. Decided it could no…
P
Printables
Earpad adaptor for Sennheiser GAME ONE/ZERO
Slip on ear pad adapter for SennheiserG4ME ZERO/ONE headset compatible with Brainwavz slip on earpads. Material: PLA+ Printer: Ender 3 Nozzle Size: 0.4mm
P
Printables
SteelSeries Arctis Nova Pro Wireless - Earpad adapter
Hi there, i designed an adapter for all Arctis ear pads for the new SteelSeries Arctis Nova Pro Wireless headset. assembly Instructions: You need to remove the ear pads (there is a video on youtube on how to remove it) check if the…
P
Printables
Sennheiser Unipolar 2000/2002 earpad replacement adapter
New earpads for Sennheiser Unipolar 2000 and 2002 headphones are long out of production. With this adapter, which fits the inner clips of the headphones, it is possible, to use replacement earpads for AKG K-300 and K-301. You have to slip…
P
Printables
Beyerdynamic DT Pro X Earpad Extender
I made this extender to increase the depth of the ear cup so my ears wouldn't touch the driver foam. This was made on a Prusa Mini+ using PLA at .15mm structural with 100% infill. I have tested the fit on my DT 900 Pro X with Dekoni…
P
Printables
Sennheiser Earpad Adapter Oval to GSA
I've designed an Adapter to put the new Earpads from an EPOS GSP 670 on my old and beloved Sennheiser HD 380 Pros. https://www.amazon.de/gp/product/B09FDD8XYN Its recommended to use 100% infill to not compromise on the sound to much. Its…
P
Printables
Earpad Adapters for Drop Panda Headphones
Printed on Bambu P1s with 0.4 noz and 0.2 layers. No supports. Used Sunlu PLA+. Be warned, there was some hot glue and super glue involved in putting this together. I don't mean to be cryptic, it's just that I'm uploading this model about…