Razer Blackshark v2 earpad frame replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The plastic frame holding the earpad in place broke, so i created a spare part for the earpad frame
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 132
- Wydruki
- 1
- Wyświetlenia
- 581
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
!!! THIS WAS DESIGNED FOR RAZER BLACKSHARK V2 ONLY (almost) !!!
Based on what I found online the V2 PRO (old model before 2023) should have the same earpad frame as the normal V2, while the V2 X and V2 PRO 2023 edition have another kind of earpad frame.
My testing only involved my normal V2, so let me know if it actually works also for your V2 PRO (old model).
I suggest printing this with PETG since it can make the clips a bit more springy and resistant than PLA.
Since this part has no optimal orientation to be printed support less, by using PETG the support removal will be a bit tricky and require some patience.