1 / 7
Moto Guzzi V85 TT air duct for rear ventilation of the windshield — zdjęcie 1
1 / 7

Moto Guzzi V85 TT air duct for rear ventilation of the windshield

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

air duct for rear-ventilation of windshield, might help with wind buffeting

Ocena
0 / 5
Polubienia
4
Pobrania
153
Wydruki
0
Wyświetlenia
1817
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution

simple air guide for mounting on the original windshield holder. May help with booming wind noise by rear ventilation of the windshield. Due to simpler printability, the part must be adjusted to the curve after printing using a hot air gun. In addition, the windshield must be modified to ensure an inflow. 

Depending on the country, the use in road traffic may be prohibited! Use at your own risk!

Print in PETG or ASA, supports are needed for the angled section

 

Update, 26.3.2023: v2 reaches further down and has the radiuses fixed. “Advanced” adds more fins, mainly to look more technical because more technical=more better. Does it help? Maybe.

Update 31.3.2023: figured that the model might be a bit thick, especially the “advanced” one. There is now a thinner part available with reduced thickness from 3 to 1,5mm

Tagi