1 / 7
Moto Guzzi V85 TT air duct for rear ventilation of the windshield — image 1
1 / 7

Moto Guzzi V85 TT air duct for rear ventilation of the windshield

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

air duct for rear-ventilation of windshield, might help with wind buffeting

Rating
0 / 5
Likes
4
Downloads
153
Makes
0
Views
1,823
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution

simple air guide for mounting on the original windshield holder. May help with booming wind noise by rear ventilation of the windshield. Due to simpler printability, the part must be adjusted to the curve after printing using a hot air gun. In addition, the windshield must be modified to ensure an inflow. 

Depending on the country, the use in road traffic may be prohibited! Use at your own risk!

Print in PETG or ASA, supports are needed for the angled section

 

Update, 26.3.2023: v2 reaches further down and has the radiuses fixed. “Advanced” adds more fins, mainly to look more technical because more technical=more better. Does it help? Maybe.

Update 31.3.2023: figured that the model might be a bit thick, especially the “advanced” one. There is now a thinner part available with reduced thickness from 3 to 1,5mm

Tags