Curved PTFE Spacer for MMU
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A five filament spacer that curves - use anywhere along filament path. PC4 size, holes 15mm apart.
- Ocena
- 5 / 5
- Polubienia
- 42
- Pobrania
- 139
- Wydruki
- 5
- Wyświetlenia
- 1027
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This 15mm spacer adds a curve to guide the MMU tubes. You can use these anywhere in your tube layout.
I originallly had this as part of a larger filament path design but have since improved with this design instead: - https://www.printables.com/model/555238-mmu3-filament-path-design
Printed in PETG black 3 perimeters, no supports, .25 layer height, general speed settings.
See my collection called Used on MMU for all modes used with the MMU setup, this being one.
My Polybox mods:
MMU PTFE large arch https://www.printables.com/model/434655
Strain relief circle for PTFE tube routing from Polybox https://www.printables.com/model/418131
(includes a clamp that works with the item below)
PC4M10 Adapters with 1mm threads for Polybox holes:
https://www.printables.com/model/416215
PTFE tube with PC3M10 1mm threaded top frame 'Fishing Rod' connector for MK3S printer
https://www.printables.com/model/428973