Sponge Holder that Swivels for Kitchen Sink
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Slips Over Faucet Handle - Easy on/off for Cleaning - 2 Parts, Tray & Arm
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 421
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
There are 2 parts, Tray & Arm, glued together. My faucet is a basic Glacier Bay model. The hole in the Arm is 45mm diameter and I imagine it might fit some other make faucets.
It slips over the handle and keeps the sponge off the sink surface. It swivels to drain over the sink if needed, and comes off easily for cleaning. I've been using this for months and (initially, to my surprise) it works great.
I used some supports on the Tray and a tiny bit on the end of the Arm where it inserts into the Tray (best seen in the 3mf file). Because of hot water contact, PETG was used.