1 / 11
Plössl Magnifier Adam B. Remix @laneymachinetech @unixcarbide 2023 — zdjęcie 1
1 / 11

Plössl Magnifier Adam B. Remix @laneymachinetech @unixcarbide 2023

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A general lens holder to make a Plössl Magnifier Lenses were sourced from surplusshed.com - Product Code: L14568 "TWO…

Ocena
0 / 5
Polubienia
2
Pobrania
13
Wydruki
0
Wyświetlenia
265
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

A general lens holder to make a Plössl Magnifier

Lenses were sourced from surplusshed.com - Product Code: L14568

"TWO LENS SET FOR BUILDING A 37MM DIA 105MM EFL ACHROMAT"

This is a quick 3d printed remix of a fine brass magnifier made by Adam B, @laneymachinetech

https://www.instagram.com/p/Cl9M89rvTiG/?utm_source=ig_web_copy_link https://www.instagram.com/p/CmE2p-ipXux/?utm_source=ig_web_copy_link

This 3d printed design includes a dovetail for mounting on a standard indicator stand arm.

Printing notes:

Depending on your filament/lenses, you may need to resize the components. I printed these after enlarging the parts x1.02 and they fit the lenses nice and snug.

You might be able to use this design as-is for different diameter lenses, by simply enlarging the objects, (and obviously, driling/tapping the screw holes).

Warning: do not overtighten the screws, they have plenty of material to bite into and could pull the print layers apart if you over-tighten them.

Category: Tools

Tagi