Din-Rail Mount for Raspberry Pi 3B+ Portrait
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Darealmoo made this really good and simple DIN-rail mount for Raspberry Pi (Din-Rail Mount for Raspberry Pi 3B+,…
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 223
- Wydruki
- 1
- Wyświetlenia
- 1370
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Darealmoo made this really good and simple DIN-rail mount for Raspberry Pi (Din-Rail Mount for Raspberry Pi 3B+, thing:3369750 ), I just did a small modification to be able to mount the Raspberry pi in a portrait way, so my Ethernet and USB cables go straight down (or up). I also used 4mm M3 brass thread inserts, although the board holes are 2.5mm so I just run a 3mm bit to carefully enlarge them.
Distance between holes is 58mm, therefore should fit any Raspberry Pi B+, 3B, 3B+, 3A+ and 4B.
Print instructions
Unassociated tags: din rail, raspberry pi
Category: Parts Summary
Darealmoo made this really good and simple DIN-rail mount for Raspberry Pi (Din-Rail Mount for Raspberry Pi 3B+, thing:3369750 ), I just did a small modification to be able to mount the Raspberry pi in a portrait way, so my Ethernet and USB cables go straight down (or up). I also used 4mm M3 brass thread inserts, although the board holes are 2.5mm so I just run a 3mm bit to carefully enlarge them.
Distance between holes is 58mm, therefore should fit any Raspberry Pi B+, 3B, 3B+, 3A+ and 4B.