1 / 4
Tronxy X1 / X3 / X5 X Carriage — zdjęcie 1
1 / 4

Tronxy X1 / X3 / X5 X Carriage

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Update 6/25/2018: Added step file This is meant to reference and not for printing. Although the plate and spacers…

Ocena
0 / 5
Polubienia
6
Pobrania
65
Wydruki
0
Wyświetlenia
462
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Update 6/25/2018: Added step file

This is meant to reference and not for printing. Although the plate and spacers could be easily printed.

This was mostly an exercise in learning to model in Fusion 360. Utilizes parts from McMaster Carr.

Also hopefully helpful for @dpetsel to make a Tronxy X1/X3 mount for the Petsfang cooler - https://www.thingiverse.com/thing:2759439

Could be helpful for others designing custom coolers/hotend/extruders.

Not perfectly accurate but pretty close. Willing to tweak, update if people find it helpful.

Cheers.

How I Designed This

Fusion 360

Method

I ripped apart my Tronxy X1's X-Carraige and took pictures of it from multiple angles. Imported those as canvases and calibrated them to the correct size in Fusion 360.

I then used calipers to measure and draw a fully constrained sketh of the basic profile. Holes might not be the perfect size or location.

Wheels, spacers, nuts & bolts imported from pre-existing assets.

Category: 3D Printer Parts

Tagi