Tube Rings with counter-weight for Skywatcher 150pds Telescope
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tube rings for my telescope with a custom little counterweight to try and offset my camera/focus weight. Fits 150mm tube
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 924
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
Tube rings for my telescope with a custom little counterweight to try and offset my camera/focus weight. Fits my 150mm Skywatcher 150pds tube.
Depending on padding material used, you might need bigger or smaller ring-diameter, but even the thicker material I used could be fastened properly when tightened. I used padding foam leftover from packing material in other parcels.
I would not trust it to carry heavy equipment without testing properly first! My counter-weight is only about 300g.
Printed in 0.3mm PETG, 15-20% infill.