Tube Rings with counter-weight for Skywatcher 150pds Telescope
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tube rings for my telescope with a custom little counterweight to try and offset my camera/focus weight. Fits 150mm tube
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 54
- Makes
- 0
- Views
- 930
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
Tube rings for my telescope with a custom little counterweight to try and offset my camera/focus weight. Fits my 150mm Skywatcher 150pds tube.
Depending on padding material used, you might need bigger or smaller ring-diameter, but even the thicker material I used could be fastened properly when tightened. I used padding foam leftover from packing material in other parcels.
I would not trust it to carry heavy equipment without testing properly first! My counter-weight is only about 300g.
Printed in 0.3mm PETG, 15-20% infill.