EBB42 Mount for Microswiss NG extruder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for BTT EBB42 CAN Tool-board for Microswiss NG Extruder (Ender 3 / similar), plus U2C mount and X cable bracket.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 108
- Wydruki
- 1
- Wyświetlenia
- 1300
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Mount for the BTT EBB42 CAN Toolboard and Microswiss NG extruder for Ender 3 / CR10.
Rather than mounting this directly on the stepper, this allows the board to be mounted horizontally to preserve function of the ADXL chip (at least for the X axis) and to provide a cable mounting point.
Cable mounting point will accept two cable ties and a piece of 3mm (pref. Nylon) filament to help keep the cable bundle more rigid.
Requires 4x 3mm heat set inserts (4mm x 4.6OD)
Also provided is an adapter that can be placed on the front of the X axis to hold the cable bundle, and a mount for the U2C. For the U2C mount, 4x 3mm heat set inserts (4mm x 4.6OD) are also required, as well as T-Nuts to fix it to the chassis.
Print using something tough and heat resistant. I used Prusament PC+CF.