EBB42 Mount for Microswiss NG extruder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount for BTT EBB42 CAN Tool-board for Microswiss NG Extruder (Ender 3 / similar), plus U2C mount and X cable bracket.
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 108
- Makes
- 1
- Views
- 1,300
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Mount for the BTT EBB42 CAN Toolboard and Microswiss NG extruder for Ender 3 / CR10.
Rather than mounting this directly on the stepper, this allows the board to be mounted horizontally to preserve function of the ADXL chip (at least for the X axis) and to provide a cable mounting point.
Cable mounting point will accept two cable ties and a piece of 3mm (pref. Nylon) filament to help keep the cable bundle more rigid.
Requires 4x 3mm heat set inserts (4mm x 4.6OD)
Also provided is an adapter that can be placed on the front of the X axis to hold the cable bundle, and a mount for the U2C. For the U2C mount, 4x 3mm heat set inserts (4mm x 4.6OD) are also required, as well as T-Nuts to fix it to the chassis.
Print using something tough and heat resistant. I used Prusament PC+CF.