1 / 1
ESP32CamCaseV2pt2
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
printed at 99% scaled size to create tight fit on the ESP32-CAM
Opening the provided ESP32CamCaseV2pt2.3mf file with PrusaSlicer will enable you to view the negative volume modifiers I used, and allow you to create your own gcode for specific printers.
I modified the original case from bkgoodman https://www.printables.com/model/75024-esp32-cam-case by:
- subtracting volume using PrusaSlicer modifiers on the front and back face to allow the case to be zip tied together.
- subtracting volume to create diagonal slots on the back of the case for heat dissipation
- subtracted volume to eliminate the button tabs, as they just broke the buttons off during testing of the original case
electronics used in this case: