DSLR Remote Holder for OctoLapse
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you want to take high quality images for your time lapses with your camera, using the remote or a limit switch.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 131
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
If you want to take high quality images for your time lapses with your DSLR camera, you will.
it is a simple setup.
print the holder and the trigger, put the holder at the end of the X axis, glue the trigger on top of the nozzle head.
setup your octolapse snap location depending on your machine (takes a few tries to get it right).
nozzle head will move on x axis to the point where the trigger hit the remote button which will make your camera take a photo.
If you don't have the remote for your camera no worries, just print the limit switch holder, buy 2.5mm jack, solder the switch and the jack with a enough long wire and once the nozzle head hit the limit switch, your camera take a photo.