1 / 1
One-handed operation on Faxes 500mm wood splitter — zdjęcie 1

One-handed operation on Faxes 500mm wood splitter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

One-handed operation on Faxes 500mm wood splitter

Ocena
0 / 5
Polubienia
0
Pobrania
12
Wydruki
0
Wyświetlenia
173
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

You need two M10 bolts long enough to fit through your handle.

I made a handle from a piece of wood and drilled two 12mm holes, since the handles on the wood splitter sits at an angle you have to make bigger holes than 10mm so it can operate loosely!

Don't tighten the screws, everything depends on it being loose enough.

I printed mine with PETG and with a layer height of 0.2mm

Tagi