1 / 1
One-handed operation on Faxes 500mm wood splitter — image 1

One-handed operation on Faxes 500mm wood splitter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

One-handed operation on Faxes 500mm wood splitter

Rating
0 / 5
Likes
0
Downloads
12
Makes
0
Views
171
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — NoDerivatives

You need two M10 bolts long enough to fit through your handle.

I made a handle from a piece of wood and drilled two 12mm holes, since the handles on the wood splitter sits at an angle you have to make bigger holes than 10mm so it can operate loosely!

Don't tighten the screws, everything depends on it being loose enough.

I printed mine with PETG and with a layer height of 0.2mm

Tags