1 / 4
Barbell 30mm to 55mm adapter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
You can use your pump-barbell 30mm with Olympic size weights with 55mm hole
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 582
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (14)Powiązane
I have used a 4mm screw with 7,5mm head and 30mm length.
Use metal saw to cut longer screws.
Printed with Prusament PETG with support enforces for holes in the bigger part. Also, used infill modifiers for 100% infill to strengthen the part.
It's a tight fit, so use your knife to cut PETG where necessary.