Tetris Fly Tying Desk Organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted a fun way to organize my fly tying desk that would be modular enough i could move tools around as I need them
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 724
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
Modular desk organizer in the form of Tetris. The tetris pieces are hollow so you can move the inserts around or make new ones for them. This covers all of the tools I have for tying flies but can probably be used for anything else that'll fit. I made the tolerances a little on the tight side so make sure your printer is fairly well calibrated. All measurements below are in mm
Cutouts in the pieces are
- 46 x 46 x 35
Inserts measure
- o.d. 45.8 x 45.8 x 35
- i.d. 44.3 x 44.3 x 34
Bobbin (measure against a Rite style regular sized bobbin)
- 44 (length) x 26 (dia.)
- This can be a big snug if loaded with a large spool of thread
Large Bottle
- 40 (dia.) x 30
Regular Bottle
- 31 (dia.) x 30
XS Round (worked for my razor and dubbing spinner)
- 11.25 (dia.) x 30
Square Bottle
- 35 x 20
Hair Stacker Small / Medium
- 32 x 20 x 10
- These are the hair stackers from Kelly Galloup
Hair Stacker Large
- 40 x 26.5 x 25
- Large stacker from Kelly Galloup
Thread Burner
- 18.5 x 30
Hareline Material Clamp 1.5"
- 10 x 12 x 30
Swiss Material Clamp
- 47 x 13 x 20
Fly holder (I think these are the 3mm test probe clips)
- 9 x 10
Tweezers (these flare outward bottom up)
- Bottom: 1.65 x 11.25
- Top: 4.5 x 11.25
- Depth: 30
Dubbing Spinner Set (JS Stockard)
- Spinner: 13.5 x 20
- Attachments: 9.25 x 15