Mean Well LRS-75-24 Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case forMean Well LRS-75-24 PSU. Has slot for a 4.9x2.9 cm power inlet module and a DC 5525 jack socket plug for output.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 185
- Wydruki
- 0
- Wyświetlenia
- 1285
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Case forMean Well LRS-75-24 PSU. Has slot for a 4.9x2.9 cm power inlet module and a DC 5525 jack socket plug for output.
Note that I left a 0.2mm gap along the horizontal section where the case and lid meet.
Link to the cad model I used as reference: https://grabcad.com/library/lrs-75-mean-well-1
Print instructions
Category: Electronics Summary
Case forMean Well LRS-75-24 PSU. Has slot for a 4.9x2.9 cm power inlet module and a DC 5525 jack socket plug for output.
Note that I left a 0.2mm gap along the horizontal section where the case and lid meet.
Link to the cad model I used as reference: https://grabcad.com/library/lrs-75-mean-well-1
Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: Yes
Resolution: 0.2mm
Infill: 10%
Filament: Any PLA / PETG Any
Notes:
If printed standing supports are not needed, however it is far likelier to warp and I got short print times printing them lying down on each part's largest surface.