Mean Well LRS-75-24 Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case forMean Well LRS-75-24 PSU. Has slot for a 4.9x2.9 cm power inlet module and a DC 5525 jack socket plug for output.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 185
- Makes
- 0
- Views
- 1,285
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Case forMean Well LRS-75-24 PSU. Has slot for a 4.9x2.9 cm power inlet module and a DC 5525 jack socket plug for output.
Note that I left a 0.2mm gap along the horizontal section where the case and lid meet.
Link to the cad model I used as reference: https://grabcad.com/library/lrs-75-mean-well-1
Print instructions
Category: Electronics Summary
Case forMean Well LRS-75-24 PSU. Has slot for a 4.9x2.9 cm power inlet module and a DC 5525 jack socket plug for output.
Note that I left a 0.2mm gap along the horizontal section where the case and lid meet.
Link to the cad model I used as reference: https://grabcad.com/library/lrs-75-mean-well-1
Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: Yes
Resolution: 0.2mm
Infill: 10%
Filament: Any PLA / PETG Any
Notes:
If printed standing supports are not needed, however it is far likelier to warp and I got short print times printing them lying down on each part's largest surface.