PrintDry 5kg Spool Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed slightly from original design by OTE. The shaft is longer now to accommodate a 5kg roll for the 5kg kit.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 262
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
Remixed slightly from original design by OTE. The shaft is longer now to accommodate a 5kg roll for the 5kg kit. The hard inserts in the rubber donuts work their way out during printing, especially with heat in the chamber. I was already having a bad Monday and this happened later that night.
This whole assembly keeps everything much straighter and smoother during operation with just a slight bit of tension to keep the roll from free spinning during feed. Use the original wire spring clips to help with this.
Printed on Bambu Lab P1P
FormFutura rPET
.20 mm Standard setting
250C nozzle
80C Bed with Textured Plate
No enclosure
Wall, Top and Bottom Loops all at 6
Triangle infill @ 25%
No Supports