HSKRC Freestyle 250 Ummagawd Remix Gopro 3 holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for HSKRC Freestyle 250 with an angle of 20 deg for Gopro 3 series Video of Gopro3 black on HSKRC Freestyle 250…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 141
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Mount for HSKRC Freestyle 250 with an angle of 20 deg for Gopro 3 series
Video of Gopro3 black on HSKRC Freestyle 250 with this printed holder: https://www.youtube.com/watch?v=MYIt4LbvZA0
Print in TPU / Ninjaflex with 30% and 2 perimeter.
print all fans allways on. cant get too much air
FFF profile is in the download section
my tpu print settings on CTC Bizer MK10
----General settings----
retraction distance : 1.5mm (UPDATED!)
retraction speed : 25mm/s (UPDATED!)
nozzlediameter : 0.4mm
layer height :0,15mm
Solid top/bottom layer : 5 (UPDATED!)
perimeter : 2
infill pattern : FULL HONEYCOMP (UPDATED!)
external fill pattern: rectilinear
overlap: 11 %
minimum infill length : 0.1mm
----Support----
suport infill : 17%
extra inflation distance :1.6mm
dense support layer :3
dense infill percentage :65%
horizontal offset :0.2mm
----Temp----
Table : ABS Juice (thin film DOOOONT touch it!!!)
Extruder Temp: 230 deg
Table temp: 0 (not powerd/ room temp / 25 deg)
---- FANs----
all full power always.
yes also the first layer :-)
----Speeds----
general speed : 37mm/s (UPDATED!)
outline :60%
infill :100%
support : 80%
x/y axis moove :150mm/s
z axis moove :22.5mm/s
---Other---
extra inflation distance :5sq/mm
bridging speed/extrusion : 100%
Allow singe extrusion INTERNAL + EXTERNAL infill
allowed perimeter overlap 50%
minimum travel for retraction 1.0mm
Category: R/C Vehicles
