HSKRC Freestyle 250 Ummagawd Remix Gopro 3 holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount for HSKRC Freestyle 250 with an angle of 20 deg for Gopro 3 series Video of Gopro3 black on HSKRC Freestyle 250…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 141
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
Mount for HSKRC Freestyle 250 with an angle of 20 deg for Gopro 3 series
Video of Gopro3 black on HSKRC Freestyle 250 with this printed holder: https://www.youtube.com/watch?v=MYIt4LbvZA0
Print in TPU / Ninjaflex with 30% and 2 perimeter.
print all fans allways on. cant get too much air
FFF profile is in the download section
my tpu print settings on CTC Bizer MK10
----General settings----
retraction distance : 1.5mm (UPDATED!)
retraction speed : 25mm/s (UPDATED!)
nozzlediameter : 0.4mm
layer height :0,15mm
Solid top/bottom layer : 5 (UPDATED!)
perimeter : 2
infill pattern : FULL HONEYCOMP (UPDATED!)
external fill pattern: rectilinear
overlap: 11 %
minimum infill length : 0.1mm
----Support----
suport infill : 17%
extra inflation distance :1.6mm
dense support layer :3
dense infill percentage :65%
horizontal offset :0.2mm
----Temp----
Table : ABS Juice (thin film DOOOONT touch it!!!)
Extruder Temp: 230 deg
Table temp: 0 (not powerd/ room temp / 25 deg)
---- FANs----
all full power always.
yes also the first layer :-)
----Speeds----
general speed : 37mm/s (UPDATED!)
outline :60%
infill :100%
support : 80%
x/y axis moove :150mm/s
z axis moove :22.5mm/s
---Other---
extra inflation distance :5sq/mm
bridging speed/extrusion : 100%
Allow singe extrusion INTERNAL + EXTERNAL infill
allowed perimeter overlap 50%
minimum travel for retraction 1.0mm
Category: R/C Vehicles
