Ikea Ivar Brackets for 19 Inches Rack Mount Devices
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a bracket for 19 inches rack mount devices. You will need to print each file two times.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 775
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a bracket for 19 inches rack mount devices. You will need to print
each file two times. You will need the following hardware to attach the
bracket on the Ivar side unit.
- 8 x 8-32 2.5 inches bolts
- 8 x 8-32 nuts
8 x washers for 8-32 bolts
You will need also four 1/2 inch long bolts with a 1/4-inch diameter along
with four matching nuts.
So far, I have mounted vertically a switch. The brackets are sturdy and do the
job very well. Nevertheless, I do not give any guarantees on how much weight
it can support. You use these brackets at your own risks. You should use a
high infill ratio such as 50%.
This object main web page is:
http://www.ctheroux.com/ikea-ivar-brackets-for-19-inches-rack-mount-devices/.
You can request the source files on the page listed above.