Watering spout for 5L bottles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An interchangeable spout system for 5L bottles, replacing the cap
- Ocena
- 4,667 / 5
- Polubienia
- 45
- Pobrania
- 362
- Wydruki
- 5
- Wyświetlenia
- 1692
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
I have some carnivorous plants that requires demineralized water, which I make trough a reverse osmosis system, and have 5L bottles to store it. Since their openings are quite wide (41mm), I designed these spouts to easily add water to the plant saucers.
They are interchangeable but require a bit of persuasion to install or remove them, the tolerances are tight. They are also sturdy, and leak proof (though they have an opening for the air to flow in at the base at both spouts, be aware of it when the bottle is full!).
I printed it with PLA on an Ender 3 v2, with a 0.4mm nozzle and a 0.2mm profile, with no supports needed.
Feel free to remix the screw cap for different bottles!