1 / 4
MiniZ Ford mustang 1967/68 fastback (sportroof) body — zdjęcie 1
1 / 4

MiniZ Ford mustang 1967/68 fastback (sportroof) body

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I've rezised the original 1:10 to 1:28 so it would fit on th mini Z chasi, basicly it is layerd 4 times on itself with…

Ocena
0 / 5
Polubienia
43
Pobrania
390
Wydruki
0
Wyświetlenia
3045
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

I've resized the original 1:10 to 1:28 so it would fit on the mini Z chassis, basicly it is layered 4 times on itself with a 0.25-0.5mm offset. Most of the time was waiting for Thinigvers to finish processing my input(up to 5-6 hours) and then going back to fix some issues in the design.

The clip is 100% my design.

Due to the processing issue i faced in thingivers there are two parts you're going to file/cut down, for the front wheels to be able to turn completely.

I've been working on this remix for almost half a year, feedback would me much appreciated.

Edit: Wheelbase is 90mm, as the MiniZ

 

Print Settings

Printer:

Voxelab Alquila

Rafts: 

Yes

Supports:

Yes

Resolution: 

0.2

Infill:

50

Filament:

PLA - White

 

 

Category: R/C Vehicles

Tagi