Mosquito Larvae Dipper Cup - Multipart v2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Multipart dipper cup used to sample mosquito larvae from a water source. This dipper snaps togethers.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 398
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Medical Tools
- Licencja
- GNU General Public License v3.0
This is version 2 of a multipart dipper cup used to sample mosquito larvae from a water source. See version 1 here. This version contains a thinner dipper cup with a replaceable snap bolt and is meant to unsnap instead of breaking. The snap bolt is held in place with a piece of filament. The hole for the filament may need to be drilled to proper size. I included the step files if you would like to customize or improve the design. If you do improve the design please share it for all to enjoy.
Print Specs:
- Filament: Hatchbox White PETG
- Infill: 50% for cup, 25% for adapter, 100% for snap bolt
- Layer Height: 0.2mm
- Nozzle: 0.4mm
- Supports: Yes on adapter
Print with a brim on the cup and adapter, and with specified supports on adapter. See the attached photos for print orientation and supported surfaces.