1 / 4
KlickyNG more stable
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
slightly modified dock to lessen 'probe wobble'
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 458
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I would sometimes get probe trigger or bad pick ups, because of tilting of the probe.
Seems like my printed Dock was never 100% flat.
I added 2 notches, to rest the dock more flat, without rocking. Since installing, hadn't had bad contact. I used the 0.3mm version, seemed good enough. Also closed the switch pin holes a bit, since mine didn't reach so far.
You can always file the notches down to sit flat on your mount.
I also added a bit reinforced mount, since mine broke (which was due a bad configured Y position of the docking)