Jetson Nano Base with Camera
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple base plate for the NVidia Jetson Nano development board along with a Raspberry PI v2.1 camera holder.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 363
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple baseplate for the NVidia Jetson Nano development board along
with a Raspberry Pi v2.1 camera holder. It can be tilted and panned. To
assemble it, you will need:
- 4 x M3, 6 mm bolts
- 4 x M2, 4 mm bolts
1 x M3, 20 mm with a nut.
No support is required. An infill of 20 to 30% is sufficient. A built-in raft
is included in the Camera holder model. It must be removed after printing.
This object main web page is:
http://www.ctheroux.com/jetson-nano-base-with-camera/.
You can request the source files on the page listed above.