1 / 5
Jetson Nano Base with Camera
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple base plate for the NVidia Jetson Nano development board along with a Raspberry PI v2.1 camera holder.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 51
- Makes
- 0
- Views
- 363
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple baseplate for the NVidia Jetson Nano development board along
with a Raspberry Pi v2.1 camera holder. It can be tilted and panned. To
assemble it, you will need:
- 4 x M3, 6 mm bolts
- 4 x M2, 4 mm bolts
1 x M3, 20 mm with a nut.
No support is required. An infill of 20 to 30% is sufficient. A built-in raft
is included in the Camera holder model. It must be removed after printing.
This object main web page is:
http://www.ctheroux.com/jetson-nano-base-with-camera/.
You can request the source files on the page listed above.