108 models
Simple case for an NVIDIA Jetson Orin Nano Developer's Kit. All ports are exposed. There are four versions of the main case: Orin_nano_case_main has holes for accessing the terminal block of the recommended CAN bus ( Waveshare SN65HVD230…
Jetson Orin Nano case I made for myself. Bottom part has 2 versions for one with PCI slot screw holes and the other is without them. Feel free to delete the mark "gears.com.tr" if you wish. For extra tidiness I punch 2 small holes with…
Jetson Nano Case A minimal snap-fit case for the Nvidia Jetson Nano. The original design ( thing:3603594 ) by ecoiras was very well done, but I prefer cooling over the logo. This is for the 4GB kit with all the ports, but I imagine also…
NanoMesh Mini is a compact case design for the Jetson Nano Developer Kit. This case be used entirely tool-less, although it can be secured with four case screws. The carrier board is held in place with stand-off pins. To secure the case…
I found this case for the jetson nano and I liked the pattern. The extra height required for the fan was something I did not need. As such, I made a similar model with the same pattern. The jetson nano pcb requires 2.5mm screws. As I only…
Astro Jetson, from the cartoon The Jetsons, by Hanna-Barbera. Astro is the pet of Elroy Jetson. He has a flair for dramatics and is not ashamed to cry for attention. His main form of exercise comes from walking the floating treadmill…
Elroy Jetson, from the comic strip The Jetsons, by Hanna-Barbera. Elroy is a six-and-a-half-year-old boy and is the only son and youngest child of George and Jane Jetson. He is highly intelligent and an expert in all space sciences. He…
George Jetson, from the comic strip The Jetsons, by Hanna-Barbera. George resides with his family and his dog Astro in Orbit City in the future. His personality is that of a well-meaning, caring father, but he is often befuddled and…
Jane Jetson, from the comic strip The Jetsons, by Hanna-Barbera. Jane Jetson is George's wife, mother of their two children, and a homemaker. Jane is obsessed with fashion and new gadgetry. She is a dutiful wife who always tries to make…
Judy Jetson, from the cartoon The Jetsons, by Hanna-Barbera Judy is the daughter of George and Jane Jetson. She is a typical teenage girl. She is obsessed with boys, rock stars, clothes, and loves to hang out with her friends from Orbit…
This is a remix of the NVIDIA Jetson Orin Nano Developer's Kit Case. I run mine in headless mode and will not be using either the camera slots or GPIO pins, so this remix changes that. You still need the base from the original. This remix…
Simple mount for the orin to attach to any other objects. Will require longer bolts than those removed from base. There is no reason StereoLabs should sell a mount for 300$.
A small 3D print to be able to fix a Nvidia Jetson Orion Nano to a Din rail. Super easy and fast print. If you like to, check out my other designs too!
NVIDIA Jetson Orin Nano case optimized for cooling, and minimizing plastic. Thin 1 mm top and bottom, and 2 mm walls. Requires 4x M4 screws that also act like feet.
This is a remix of the NVIDIA Jetson Orin Nano Developer's Kit Case. Modified it to work with the Adafruit Can PAL (CAN FD), and created a honeycombed bottom to provide airflow for the M.2 SSD and the rest of the Jetson's underside…
Link for the screen: https://www.aliexpress.com/item/1005001704445373.html Infill: 20% Filament: PLA, PETG, ABS … Wall thickness: 3. Support required.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
A small combination mounting bracket and standoffs for an NVIDIA Jetson Nano developer kit. Mounting holes are 5mm, or fit a #10 imperial screw. Print at whatever settings you like, no need for supports.
I really liked the look of YUN3D's case, but I had a few issues with it. Ive created my own from scratch, which is why it's a slightly different shape. Added Camera Ribbon slot Added feet Up to 3 configurations: Antennas on Front,…
I was looking for a jetson orin nano case that allowed to add a SSD including a (one) fan - here it is. Top part here, other items (bottom and bottom plate) from…
These are the Case with I/O slot cover for the JetsonNano 1st/B01/2GB. It can be fitted with a fan. The SD card is not allowed to fall into the gap. JetsonNano Case for JetsonNano 1st JetsonNano_Case_Case_Top_A is Top Case with Top I/O…
Remix of https://www.thingiverse.com/thing:4523772 by ysiegel. Changes to bottom: Increased the thickness of the base by 2.8mm and added indentations to hold four M4 nuts to match the VESA 75mmx75mm mounting pattern. Added a 1.6mm deep…
Characteristics: Has access to many common ports that you may use frequently. Include: 4 tactile switches, J21 and J26 GPIO headers, SATA port, heatsink and fan, onboard camera, LAN port, SD card reader, HDMI port, USB3.0 port, micro USB…
First working 3D printable enclosure for the brand-new NVIDIA Jetson Thor Developer Kit! Features (free version): – Simple press-fit / snap-fit design – Open bottom (rubber feet sit on desk) – Minimal supports required on port holes only…
Slim case for the Nvidia Jetson Nano 2GB version. I just enlarged the mounting holes on the board, with a drill, to use 3mm screws as I have a lot of them. I used M3x6mm screws to mount the board and the lid into these brass inserts. The…
Diese Figur zeigt Jane Jetson, die charmante und stilbewusste Mutter der Jetsons. Mit ihrer eleganten Frisur, dem typischen Kleid und der freundlichen Pose ist sie eine tolle Ergänzung für jede Jetsons-Sammlung oder futuristische…
This is a compact two-piece case for the NVIDIA Jetson Orin Nano Devkit intended for use with external antennas, and without the stock plastic frame. All other cases I've found were intended for use with the stock plastic frame and…
This is a housing that I made for myself to keep the Jetson Orin Nano Vertical to increase the air circulation around the SSD, CPU/GPU and try to reduce the desk footprint a little bit. Housing is intended to be a single printed part. For…
Fits top part as normal but this version has a hole in the bottom to allow for the 1TB NVME with heatsink which does not fit in the original case bottom.
Based upon a previous design approach for a Raspberry Pi 4 (see here ), this is another two part enclosure/case now sized for the NVIDIA Jetson Orin dev kit. The design has been made as compact as possible, providing good air flow through…
Based on the Jetsons family car from the original cartoon, designed in Tinkercad. Recommend printing at 150% or above, example is 200% to get the engines to print nicely. I printed the hull vertically with the tail on the print bed and…
Mounting plate for installing Nvidia Jetson Nano on Devastator Tank (DFRobot)
Based upon a previous design for a Raspberry Pi 4 (see here ), this is another two part enclosure/case now sized for a Jetson Nano dev kit, incorporating a mounting for a cooling fan - with an additional separate fixing bracket for a…
A frontpanel for the seeed studio case. Mine got delivered with the wrong frontpanel. https://www.seeedstudio.com/re-computer-case-p-4465.html
This is a custom designed 3d print model for the Jetson Scooter's brake. My son's brake busted and I redesigned it to be stronger than the original using this model, and printed in a fun color. I hope you enjoy. To add stability I used…
I wanted the smallest possible case for my Jetson Nano DevKit that gave me a place to mount the antennae for the Intel WiFi card and also allow for access to all the I/O. The board is attached to the base of the case with M2.5 standoffs…
Screw-Free Clip-On Case for Nvidia Jetson Nano 2GB Kit
This is a simple baseplate for the NVidia Jetson Nano development board along with a Raspberry Pi v2.1 camera holder. It can be tilted and panned. To assemble it, you will need: 4 x M3, 6 mm bolts 4 x M2, 4 mm bolts 1 x M3, 20 mm with a…
--- The outer four holes can be used to insert 4xM2 metal threads (e.g. “ruthex M2 Gewindeeinsatz”) and fix the jetson nano developer kit on it with four M2 screws. The inner two holes can be used to fix the stand with two M3 screws on a…
This bottom part has more space for mounting thick SSDs. Screw holes changed with studs that fits the original case.
I love Jane Jetson by RedDadSteve. I have her printed and on a shelf in the house for everyone to see. That shelf also happens to be in a “High Traffic" area of my house. I have been nervous that Jane may get bumped and fall off of her…
This model is just the IO shield of the Jetson Orin Nano.
The Astro is an open-source gaming handheld based on the Jetson Nano single board computer. It is designed with the goals of performance, ergonomics, and to be built using off the shelf components and 3D printed parts. This is the…
Moved some cutouts to fit the developer board
I am learning AI to try and stay relevant and maybe bring it to some projects. I got a Seeed Studio Jetson device and running it at MAXN and keeping it busy can cause thermal throttling. After attaching a fan there is not enough clearance…
This is a case to hang the NVIDIA Jetson Nano on a wall. Internal space is enough to accommodate the board and a PoE module (I use one for Raspberry PI). Materials NVIDIA Jetson Nano! PoE Module i.e. DSLRKIT Power Over Ethernet Poe Hat…
The Jetson's Flying Car: I designed this in 2015, before I had a 3D printer. I bought a print online. Hopefully 10 years on I should be 10 times better at Computer Aided Design... right? Today I updated the CAD for my current printer and…
Wall mount for jetson nano in this case: https://www.thingiverse.com/make:666950 Revisions coming (or not).
Attachment for Jetson Nano 2GB. Print settings: layer height: 0,2 mm perimeters: 2 infill: 15% (gyroid pattern) Additional material You will need 3 M3 x 15 (or M3 x 16) screws and 3 M3 hex nuts to attach development board to the…
Same as the other models, M3 machine screws for mounting, #6 x ½" (3mm x 10mm) wood screws for assembly. You can install a molex female in the back for power. Sources on github. See the rest of the collection here:…
Inspired by my bosses when I told them my co-worker was doing such a great job that my socks were blown off! The socks are optional. I tried to model 'smoke' and will try to add shredded cotton to enhance it. I drilled small holes in…
Ich wollte eine eigene Version eines Jetson.One Human Flight Quadcopter entwerfen. Dies ist wie schon gesagt und angelehnt an den Jetson.One . Ich habe für mein Modell 7 Zoll Propeller verwendet. Die ich noch von einem anderen Projekt…
Stack various IoT components such as a NVIDIA Jetson Nano, Raspberry Pi, TP-Link PoE Hub and general sensor frame to create a compact, organized module that can be used for various projects. Stack frames can be linked with M5 nuts and…
My own custom design for a agx orin 64gb bottom plate . It uses 5.9mm holes that stay snug with a 6mm bottom plate.
I'm using this modular Rack: https://www.printables.com/model/141927-2u-modular-raspberry-pi-rack As I don't have enough raspberry pis to fill it but have a jetson laying around I modified the tray to hold the jetson nano. Attach the SSD…
I really like madelinegannon's design but i wanted to be able to attach wlan antennas to the jetson nano stand. Category: Computer
Top Part of Jetson Nano 2GB case. Based on ScantyDaemon's Thing. Wanted to have a 80mm Fan with my Jetson Nano to keep it cool in my bag. So i modified it to my needs. Used the bottom part of the original, my new top part and the 90degree…
Fork cover designed specifically for JETSON BEAM e-scooter
Rack Sleed For Jetson Orin Nano
Requires 4 M2.5 x 6/8 Screws to attach. I recommend printing in PETG or similar to avoid the plate bending over time due to weight.
Jedná se o držák pro uchycení Jetson Nano verze s 4GB. Držák má 4mm díry pro vložení M3 závitových vložek a k tomu dvě díry pro uchycení výrobku s úchytem na DIN lištu. Držík DIN naleznete zde: Držák na DIN lištu pro závitovou vložku M3…
IKEA Skadis Mountable SSD Heatsink Base for NVIDIA Jetson Orin Nano Developer's Kit Case Modified base for Harrison's NVIDIA Jetson Orin Nano Developer's Kit Case (linked below). Can be combined with any main case part from the original…
Wand-Dashboard für Home Assistant auf Raspberry Pi + Waveshare 10.1" Touch-Display (10.1DP-CAPLCD, 1280×800, IPS, kapazitiv, optical bonding, HDMI). Kein Fully-Kiosk-Browser, keine Android-Lösung — bewusst minimal: Raspberry Pi OS Lite,…
To avoid accidently hitting the power button, I have designed a cover cap for the power switch with my beginner CAD skills. Also, with the smaller Jetson bike, there is no kill switch on the body of the bike to turn off the power. Larger…
Rubber feet for the grooves for
With the new popularity of these being used to run agent harnesses like OpenClaw, thought this would be fun to build. The original design workflow is located on OnShape if you wanted to copy it there and modify it yourself. OnShape:…
Remixed a pegboard mounting plate to for use with a first rev Jetson Nano Dev Kit. In my application I used the same screws and standoffs that came with the Geekworm metal case I was using previously so ymmv, though you'll probably want…
The A203 Jetson Xavier NX provides only two USB ports, so I designed a custom case with an integrated USB hub holder to expand connectivity. The case features a tool-free, screwless snap-fit design , allowing the USB hub to fit securely…
Nut support tool for heatsink of Jetson Nano Print Settings Printer: KINGROON KP3S Rafts: No Supports: No Resolution: Layer Thickness: 0.2mm Infill: 20% Filament: Polymaker PolyTerra PLA Black Category: Tool Holders & Boxes
My second-hand/surplus Jetson AGX Xavier (JAX) dev kit was missing one of the injection molded bases and wouldn't sit flat on a desk. There's also no way to mount WiFi antenna with the stock Nvidia design. I printed mine with GF PETG and…
This is a housing that I made for myself to keep the Jetson Orin Nano Vertical to increase the air circulation around the SSD, CPU/GPU and try to reduce the desk footprint a little bit. Housing is intended to be a single printed part. For…
Requires 4 M2.5 x 6/8 Screws to attach. I recommend printing in PETG or similar to avoid the plate bending over time due to weight.
With the new popularity of these being used to run agent harnesses like OpenClaw, thought this would be fun to build. The original design workflow is located on OnShape if you wanted to copy it there and modify it yourself. OnShape:…
My own custom design for a agx orin 64gb bottom plate . It uses 5.9mm holes that stay snug with a 6mm bottom plate.
The Jetsons - George, Jane, Judy, Elroy, Astro and Rosie - 1962 3D printable model.
Mounting plate for installing Nvidia Jetson Nano on Devastator Tank (DFRobot)
Simple carrier for the NVIDIA Jetson Orin Nano Developer kit carrier board with detachable DIN rail mounts. The lid is secured to the top of the carrier with four M3 screws. The bottom DIN rail mounts have space for an M4 nut, and are…
no need to resize the model. Print slower to increase the precision of the thread.
This are inserts for 3mm screws https://www.printables.com/model/555369-nvidia-jetson-orin-nano-developers-kit-case
Diese stylisierte Figur zeigt George Jetson – den ikonischen Vater aus der futuristischen Zeichentrickserie „Die Jetsons“. Die Figur ist perfekt für Retro-Fans, Sammler und Sci-Fi-Liebhaber. George steht auf einem stabilen Sockel, mit…
NVIDIA Jetson Nano (Original model with Heat Sink) case, optimized for heat dissipation. No cut outs for camera or GPIO pins. Requires 4x M4 screws to close up, and they also act like feet.
Introduction This is the official open-source enclosure for the Jetson Field Kit , a rugged prototyping stack for the NVIDIA Jetson Orin Nano. Designed for edge AI and robotics applications, this case turns your developer board into a…
This cover protects the open circuit board on the bottom of the Jetson. It's a friction fit, so to remove it, use a screwdriver to ease away each corner.
The Nvidia Jetson Orin Nano developer kit comes with the PCB mounted on a plastic frame. This frame hosts both the Nvidia Jetson itself, along with the antennas for the WiFi module (mounted underneath). This model is based on the stock…
nvidia jetson nano dev kit 4gb case for 3 parts. Use 3 fan 30x10mm 5v or 12v Use 2.5mm threaded sleeves and bolt Fan bolt 2.5x16mm Jetson bolt 2.5x5mm
Re-designed back plate for the Unitree Go2 allowing the seamless integration of the Nvidia Jetson Thor compute module as a backpack. There are many great models out there allowing to mount the Jetson Thor on the Go2, but none of them try…
Jetson Orin Nano Dev Kit. Models suppose use of M 3.5 screws and nuts. Screws length 8-10mm. Nuts has to be hexagon 6.6x2.7mm.
A case for the Jetson Nano 2GB model with room for a Noctua NF-A4x20 FLX fan.
The is one in my series of expandable wall-chain designs allowing for no-floor-space SBC clusters.
This mount allows mirror to be attach to the end of handlebar to enable visibility to the back of traffic
PCI card support bracket for Nvidia Jetson AGX Orin. 32mm separated holes on each piece allows for two to be printed and mount a 40mm fan between.
Remix of madelinegannon 's vertical stand to fit a SanDisk 1TB Extreme Portable External SSD. Original model by madelinegannon : https://www.thingiverse.com/thing:3703367 Printed with a Prusa MK3S+, PLA and 0.15mm layer height.
NVIDIA Jetson Nano case with camera holder(IMX219-160IR) I have used small 60x60 CPU FAN as well, you can edit source file if you have different fan or you can use it without fan at all if your Jetson Nano is not running under heavy load.…
The mount that came with the case pointed down for robotics work. This points straight-forward. Printed in PETG with a 0.8mm nozzle in the pictures.
A maid robot to display cards Here is Rosie…
