1 / 2
Higher Lid For Seeed Studio Jetson J1020, J2021, J2022 With Space For Fan — image 1
1 / 2

Higher Lid For Seeed Studio Jetson J1020, J2021, J2022 With Space For Fan

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Keep it cool and safe.

Rating
0 / 5
Likes
6
Downloads
45
Makes
0
Views
390
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Share Alike

I am learning AI to try and stay relevant and maybe bring it to some projects.  I got a Seeed Studio Jetson device and running it at MAXN and keeping it busy can cause thermal throttling. After attaching a fan there is not enough clearance with the standard lid so I made this replacement which adds enough space for a 20mm deep fan.

I am using this on the J1020 v2, although it should fit the J1020, J2021 and J2022 as well.

To use this lid with magnetic attachment you will need some fan screws commonly supplied with Noctua and other fans.

Printing

There is a Bambu Studio configured profile as well as an un-configured 3MF. The model prints in place with no supports with the top of the lid flat on the print bed.

Assembly

Just screw the screws in. The magnetism works better if you screw them in flush with the edge just near the screws.

Tags