Jetson Orin Nano Open Housing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 3D printed single part vertical housing for the Nvidia Jetson Orin Nano
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 98
- Makes
- 0
- Views
- 465
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
This is a housing that I made for myself to keep the Jetson Orin Nano Vertical to increase the air circulation around the SSD, CPU/GPU and try to reduce the desk footprint a little bit.
Housing is intended to be a single printed part.
For mounting the PCB please use the original 4 self cutting crews of the original Jetson Orin Nano Dev kit plastic frame.
Wifi Antenna mounting: Please see the attached images!
Theoretically you can print the part without support but enabling tree support would be advisable.
Any filament type should be fine...
Please see the images (form the slicer) for the print orientation!