Milwaukee Circular Saw (CCS55) Rail/Track Adaptor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Milwaukee Circular Saw (CCS55) Rail Adaptor: - Created for CCS55, to be used on Matika track saw rails.
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 212
- Wydruki
- 0
- Wyświetlenia
- 3090
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- GNU General Public License v3.0
Milwaukee Circular Saw (CCS55) Rail Adaptor:
- Created for CCS55, to be used on Matika track saw rails (but should also fit festool and milwaukee tracks).
- The design is intended to be used with a 6mm thick base plate, for the saw to rest on. The base plate is attached in the through holes in the adaptor.
- The function of the adaptor is to set the absolute distance from the track profile the to side of the saw.
Note 1: Its highly recommended to add a support block on the inside of the saw baseplate to prevent it from moving away from the adaptor side wall (shown in the pictures).
Note 2: The adaptor can ONLY do straight cuts, not bevel cuts!