1 / 4
Hexagon Alien Gems - Candy Mold (2ml x 105)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A negative for making a silicone candy mold.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 101
- Wydruki
- 0
- Wyświetlenia
- 840
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (26)Powiązane
I was making some candies and didn't want to shell out for an expensive mold I liked, so I made my own.
Each candy is 2ml at original scale. There are 105 of them. They're hexagonal gem shapes with alien faces on the top.
I printed this on a bambu X1-Carbon at .08mm layer height and just barely had enough detail for the alien face details. I'd imagine you could get a perfect mold with a resin printer. However, even without fine detail, the volume and general shape should be consistent.
How to use:
- Print the model
- Pour food-safe silicone into it and let it cure
- You now have a candy/gummy mold.
Pitfalls/Potential changes:
- Alien faces are a small detail and may not show depending on your layer height
- The resulting mold could be thinner, though it's not particularly “thick”
- This model is slightly too large for the build plate of the MK3+. I'll have to make another version with slightly less candies.