1 / 1
Print-In-Place locking mechanism for the original SKADIS Ikea board (Open Design) — zdjęcie 1

Print-In-Place locking mechanism for the original SKADIS Ikea board (Open Design)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a remix of a mechanism to lock something to an Ikea SKADIS board. The original was made for different thickness.

Ocena
0 / 5
Polubienia
14
Pobrania
65
Wydruki
0
Wyświetlenia
837
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution

The original design by @Német István was created for a board that is thinner than Ikea's and this remix changes only this one dimension.

I have tested this print and it fits the Ikea board thickness – see photo.

This design has little use on its own. István meant it as a part to incorporate in your own designs, so I'm also uploading a Fusion model.

License: I'm copying István's license as I take no credit for this design. István had the original idea, fine-tuned tolerances and even explained how to alter his model. 

 

Tagi