Ender 3 V2 - 10W Laser Mount (2.5degrees tilt)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of my Laser mount with 2.5degree tilt as my cover wasn't level and this compensates for it.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 357
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
This is the first thing I have designed so it may be overly engineered but it works for me.
I purchased the Creality 10W Laser module and as I have converted my printed to direct drive (using the Creality conversion kit) I could not use the original bracket and I wanted to be able to quickly switch between being able to print and laser and this was my solution.
Fitting is tight where the laser attaches.
This is my first model, might be a little over the top, but it works for me so thought I would share.
My fan shroud seems to have a slight tilt so this model compensates for it to have the laser level by offsetitng it by 2.5 degrees.