Ender 3 V2 - 10W Laser Mount (2.5degrees tilt)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.02 – €3.69 net (excluding VAT)
For file: Laser Mount (2.5 Degrees).gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.35 excluding VAT (range midpoint).
- Weight reported by the author
- 40 g
- Print time reported by the author
- 3.45 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Remix of my Laser mount with 2.5degree tilt as my cover wasn't level and this compensates for it.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 24
- Makes
- 0
- Views
- 357
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Public Domain
This is the first thing I have designed so it may be overly engineered but it works for me.
I purchased the Creality 10W Laser module and as I have converted my printed to direct drive (using the Creality conversion kit) I could not use the original bracket and I wanted to be able to quickly switch between being able to print and laser and this was my solution.
Fitting is tight where the laser attaches.
This is my first model, might be a little over the top, but it works for me so thought I would share.
My fan shroud seems to have a slight tilt so this model compensates for it to have the laser level by offsetitng it by 2.5 degrees.