Magnetic Bowl
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model is a 3d printable magnetic bowl. All you have to do is print the two pieces and glue in a magnet and the lid.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 242
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
This magnetic bowl is great for holding small screws. I use it to hold screws while working on fencing equipment. The model I have tested used a 30mm x 1.75mm magnet. I have also created a model that uses a 30mm x 2mm magnet, however I have not tested that design.
Materials needed:
- Glue
- Magnet (30mm x 1.75) or (30mm x 2mm)
Printing:
I printed in PETG though PLA should work.
Print either bowl design and the lid. The lid is the same regardless of the bowl.
No support material is needed.
Use your desired infill amount.