Honeycomb nozzle holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Organise your nozzles by size on the wonderful honeycomb wall storage.
- Ocena
- 3 / 5
- Polubienia
- 57
- Pobrania
- 273
- Wydruki
- 0
- Wyświetlenia
- 1171
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Do you not want to storage your nozzles beautifully and on your honeycomb wall?
Here is an holder for the honeycomb storage wall which allows you to organise your nozzles by size.
The model has the sides labeled as follow:
- 0.6mm x2
- 0.4mm x2
- 0.8mm x1
- 0.2mm x1
STLS and GCODES included.
CHANGELOG
V2 - Hook insert:
I noticed with many nozzles the empty insert it cannot be sufficient to hold the nozzle holder (it really depends on the tolerance resulted from printing the honeycomb wall and the insert side of the nozzle holder)
So the version 2 changes the empty insert for a hook, and together with the empty double tape insert I designed (or the original one for screws) you can have much stronger results.
V1 - Initial model: the insert is an empty insert