Very Simple FPV Conversion - Multiplex Easystar 2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a simple addition to Sjefke's FPV platform for the easystar 2 so that i could mount a cheapo board camera.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 736
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Just a simple addition to Sjefke's FPV platform for the easystar 2 so that i could mount a cheapo board camera.
The hooks hold it onto the original Easystar 2 mounting locators, you'll need 2 of course.
The camera bracket fits a board camera without the outer square cut off, I think they are approx 40mm square. For me just friction was enough to hold the camera in place. The camera bracket to the mounting plate i drilled and screwed, glue would be fine though.
Print instructions
Category: R/C Vehicles Summary
Just a simple addition to Sjefke's FPV platform for the easystar 2 so that i could mount a cheapo board camera.
The hooks hold it onto the original Easystar 2 mounting locators, you'll need 2 of course.
The camera bracket fits a board camera without the outer square cut off, I think they are approx 40mm square. For me just friction was enough to hold the camera in place. The camera bracket to the mounting plate i drilled and screwed, glue would be fine though.