1 / 1
USB-C Dust cap
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dust cap with lanyard hole for USB-C ports . May interfere with some phone cases
- Ocena
- 5 / 5
- Polubienia
- 70
- Pobrania
- 972
- Wydruki
- 5
- Wyświetlenia
- 3089
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 5) (Komentarze: 6)Remiksy (0)Kolekcje (115)Powiązane
Was tired of de-linting my usb-c phone port.
So I made a simple dust cap for USB-C ports . Has hole for lanyard so as not to lose it . Print out of TPU .
May interfere with some phone cases.
Please make sure fit is proper before jamming into usb-c phone slot and highly recommend using TPU.
*NOTE: Not responsible for damage to your phone if used improperly
Printed with 3D Solutech TPU
230 C nozzle
40 C bed
.2 mm layer height 40% fan