1 / 3
XIAOYI ZOOM LENS 12-40mm 1:3.5-5.6 (Yi M1) lens hood
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lens hood for the stock zoom lens of the Yi M1 mirrorless camera. The hood can be stored reversed on the lens.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 319
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
The lens hood only works above 25mm focal length of the lens, below the hood is visible in the picture. The mount works both ways as shown in the pictures, it clicks into place in the used position and can be reversed for a compact package during transport and storage.
I've printed mine out of regular PLA. The tolerances can be quite tight so if it doesn't fit you might want to remove some material from the inside to make it fit. Mine fit snugly straight off the printer.